TSW1250 GUI
Figure 12. Enabling Ramp Test Pattern in the ADS5263 GUI
•
Press the Capture button in the TSW GUI.
•
Time Domain:
–
Select the Time Domain tab in the GUI.
–
Uncheck the overlay unwrap waveform button.
–
Graph shows the captured time domain data.
It Must be a clean digital ramp that increases from code 0 to code 65535 from one sample to the
next. Note that the starting code in the capture graph is not fixed and can be anywhere from 0 to
65535.
14
ADS5263EVM Evaluation Module
SLAU344
–
May 2011
Copyright
©
2011, Texas Instruments Incorporated