4 Device Configuration
The ADC35XXEVM GUI provides an easy-to-use interface for programming the ADC3541 registers. Most
register functions are accessible through buttons or drop-down menus.
Figure 4-1. ADC35XXEVM GUI
4.1 Low Level Control
The ADC3541 registers can also be read or written directly. All values are in hexadecimal.
Reading the contents of a register can be performed by entering the register address in the
Address
field, and
clicking the
Read Register
button. The register value will then be displayed in the
Log
field.
Writing to a register can be performed by entering the register address, in the
Address
field, and the desired
register value in the
Write Data
field. The write data will then be displayed in the
Log
field.
4.2 Current Monitoring
The current that is being consumed by the
on its +1.8VDC rails (AVDD and IOVDD) can be
monitored through the front page of ADC35XXEVM GUI. Click the "Measure Power" button to refresh the current
values.
Device Configuration
SBAU294 – JULY 2020
ADC3541EVM Evaluation Module
7
Copyright © 2020 Texas Instruments Incorporated
