ADC32RFxx Quick-Start Procedure ADC32RF45 Bypass LMFS82820 Mode
10
SLAU620A – April 2016 – Revised May 2016
Copyright © 2016, Texas Instruments Incorporated
ADC32RF45/RF80 EVM Quick Startup Guide
Figure 5. ADC and LMK Configuration Files
7. Press SW1 (
ADC RESET
) to provide a hardware reset to the ADC.
8. Go to the
Low Level View
tab and click
Load Config
. Navigate to the provided file called
ADC32RF4x_12bit_LMFS_82820.cfg
and press
OK
.
9. Press
Read All
on the
Low Level View
tab. (The settings loaded by the ADC config file in step 7 will
not be reflected in the ADC32RFxx main tab unless the
Read All
is performed.)
10. Go to the
ADC32RFxx
tab.
