Quick Start Guide
4
SLAU630A – August 2015 – Revised August 2016
Copyright © 2015–2016, Texas Instruments Incorporated
ADC31JB68 Evaluation Module
2
Quick Start Guide
This section guides the user through the EVM test procedure to obtain a valid data capture from the
ADC31JB68EVM using the TSW14J56EVM capture card. This should be the starting point for all
evaluations.
2.1
Software Installation
The proper software must be installed before beginning evaluation. See
for a list of the
required software. The
section of this document contains links to find the software on the TI
website.
NOTE:
The software must be installed before connecting the ADC31JB68EVM and TSW14J56EVM
to the computer for the first time.
2.1.1
ADC31JB68 GUI Installation
The ADC31JB68 GUI is used to control the ADC31JB68EVM. It must be used to properly configured the
devices on the EVM.
1. Download the GUI from the TI website. The
section of this document contains a link to find
the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.
2.1.2
High Speed Data Converter Pro GUI Installation
High Speed Data Converter Pro (HSDC Pro) is used to control the TSW14J56EVM and analyze the
captured data. Please see the HSDC Pro user’s guide for more information.
1. Download HSDC Pro from the TI website. The
section of this document contains the link to
find the software on the TI website.
2. Extract the files from the zip file.
3. Run
setup.exe
and follow the installation prompts.