manualshive.com logo in svg

Texas Instruments 83PL/CLM/1L1/V - 83 Plus Calc, Manual Book, Page: 655 / 827

Share
Download
Texas Instruments 83PL/CLM/1L1/V - 83 Plus Calc Manual Book Download Page 655

TI-83 Plus

Communication Link

652

Error Conditions

A transmission error occurs after one or two seconds if:

• 

A cable is not attached to the sending unit.

• 

A cable is not attached to the receiving unit.

Note: If the cable is attached, push it in firmly and try again.

• 

The receiving unit is not set to receive transmission.

• 

You attempt a backup between a TI-73, a TI-82, or a TI-83 and a

TI-83 Plus

.

• 

You attempt a data transfer from a 

TI-83 Plus

 to a TI-83, TI-82, or

TI-73 with variables or features not recognized by the TI-83, TI-82, or
TI-73.

• 

New variable types and features not recognized by the TI-83, TI-82,
or TI-73 include applications, application variables, grouped
variables, new variable types, or programs with new features in them
such as 

Archive

, 

UnArchive

, 

SendID

, 

SendOS

, 

Asm(

, 

AsmComp(

, and

AsmPrgm

.

• 

You attempt a data transfer from a 

TI-83 Plus

 to a TI-82 with data

other than real lists 

L

1

 through 

L

6

 or without using menu item

5:Lists to TI82

.

Summary of Contents for 83PL/CLM/1L1/V - 83 Plus Calc




























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments