manualshive.com logo in svg

Texas Instruments 83PL/CLM/1L1/V - 83 Plus Calc, Manual Book, Page: 636 / 827

Share
Download
Texas Instruments 83PL/CLM/1L1/V - 83 Plus Calc Manual Book Download Page 636

TI-83 Plus

Communication Link

633

Connecting Two Calculators with a Unit-to-Unit Cable

The 

TI-83 Plus

 link port is located at the center of the bottom edge of the

calculator.

1. Firmly insert either end of the unit-to-unit cable into the port.

2. Insert the other end of the cable into the other calculator’s port.

Linking to the CBL/CBR System

The CBL 2/CBL and the CBR are optional accessories that also connect
to a 

TI-83 Plus

 with the unit-to-unit link cable. With a CBL 2/CBL or CBR

and a 

TI-83 Plus

, you can collect and analyze real-world data. The

software that enables this communication is built into the 

TI-83 Plus

.

(Chapter 14).

Linking to a Computer

TI-GRAPH LINK™

 is an accessory that links a 

TI-83 Plus

 to enable

communication with a computer. A Macintosh

ë

-compatible

TI-GRAPH LINK

 is available separately.

You can access 

TI-GRAPH LINK

 guidebooks through

education.ti.com/guides

.

Summary of Contents for 83PL/CLM/1L1/V - 83 Plus Calc




























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments