Texas Instruments 83PL/CLM/1L1/V - 83 Plus Calc, Manual Book

Page: 118 / 827

TI-83 Plus Function Graphing 115
Turning On or Turning Off a Stat Plot in the Y= Editor
To view and change the on/off status of a stat plot in the
Y=
editor, use
Plot1 Plot2 Plot3
(the top line of the
Y=
editor). When a plot is on, its name
is highlighted on this line.
To change the on/off status of a stat plot from the
Y=
editor, press
}
and
~
to place the cursor on
Plot1
,
Plot2
, or
Plot3
, and then press
Í
.
Selecting and Deselecting Functions from the Home Screen or a
Program
To select or deselect a function from the home screen or a program,
begin on a blank line and follow these steps.
1. Press
 ~
to display the
VARS Y
.
VARS
menu.
2. Select
4:On/Off
to display the
ON/OFF
secondary menu.
Plot1
is turned on.
Plot2
and
Plot3
are turned off.