19-10 Communication Link
8319LINK.DOC TI-83 Intl English, Chap 19 Bob Fedorisko Revised: 02/19/01 1:24 PM Printed: 02/19/01 1:40 PM
Page 10 of 10
To copy the exact contents of memory in the sending TI
-
83
to the memory of the receiving TI
-
83, put the other unit in
receive mode. Then, on the receiving unit, select
C:Back Up
from the
LINK SEND
menu.
•
Warning:
C:Back Up
overwrites the memory in the
receiving unit; all information in the memory of the
receiving unit is lost.
Note: If you do not want to do a backup, select
2:Quit
to return to
the
LINK SEND
menu.
•
Select
1:Transmit
to begin transmission.
As a safety check to prevent accidental loss of memory,
the message
WARNING
.
Backup
is displayed when the
receiving unit receives notice of a backup.
•
To continue with the backup process, select
1:Continue
.
The backup transmission begins.
•
To prevent the backup, select
2:Quit
.
Note: If a transmission error is returned during a backup, the receiving
unit is reset.
When the backup is complete, both the sending calculator
and receiving calculator display a confirmation screen.
Backing Up Memory
Memory Backup
Receiving Unit
Memory Backup
Complete
