Texas Instruments 2000 series, Reference Manual

Page: 38 / 52

High Performance RA-RFM RI-RFM-008B February 2002
38
5.1 Regulatory Notes
Prior to operating the RFM together with antenna(s), power supply and a control
module or other devices, the required FCC or relevant government agency (CE)
approvals must be obtained. Sale, lease or operation in some countries may be
subject to prior approval by government or other organizations.
5.1.1 FCC Notices (U.S.A)
A typical system configuration containing the RFM has been tested and found to
comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
rules. It is the responsibility of the system integrators to get their complete system
tested and to obtain approvals from the appropriate local authorities before
operating or selling this system.
5.1.2 CE Conformity (Europe)
A CE Declaration of Conformity is available for the RFM at TI-RFID Sales Offices.
The equipment complies with the essential requirements of the Telecommunication
Terminal Equipment Act (FTEG) and the R&TTE Directive 99/5/EC when used for
its intended purpose.
Any device or system incorporating this module in any other than the originally
tested configuration needs to be verified against the requirements of the
Telecommunication Terminal Equipment Act (FTEG) and the R&TTE Directive
99/5/EC. A separate Declaration of Conformity must be issued by the system
integrator or user of such a system prior to marketing it and operating it in the
European Community.
It is the responsibility of the system integrators to get their complete system tested
and obtain approvals from the appropriate local authorities before operating or
selling the system.