18
10. In order to mount the bar, loosen bolts
11. The bar is placed in the holder and the chain is
assembled around the bar and drivewheel.
12. Coveret is placed ontop of the bar and the bolts are
tightened again.
13. Use the adjustment bolt to tighten the chain.
When the chain can be lifted 1-2 mm from the bar, the
adjustment is correct.
Starting up and how to use
The product is equipped with a two-step safety switch. The machine will only work when
the on/off switch in the handle (3) and on the side of the handle (2) are activated at the
same time. If one of the switches is released the blade will stop running.
During work the harness must at all times be placed correct. The harness is placed over
one should, sideways crossing the body. See pictures below.
2
3
