Texas Equipment 90063252, User Manual, Page: 10 / 20

10
9. Tips and advices
Apart from hedges the hedge trimmer may also be used
for cutting bushes.
The best cutting effect is achieved when holding the
blade at an angle to the hedge of approx. 15

.
The opposite rotating knives cut on both sides, and it is
therefore possible to trim the hedge in both directions.
The sides of the hedge are trimmed using curve shaped
movements from the bottom and upwards.
The figure below shows how the hedge trimmer is used
to get the optimal result.
10. Maintenance
Before any service and maintenance is done,
the power must be disconnected, it means the
battery removed from the tool.
•
Remove the battery before you clean and store the
machine.
•
For obtaining the best cutting results the knives
must be cleaned and oiled regularly. Remove dirt
with a soft brush and oil lightly.
•
Use biodegradable oil.
•
Clean the housing and other parts with a mild
cleanser and a moist cloth. Never use aggressive
cleansers or solvents.
•
Prevent water from getting into the machine.
11. Storage
Store the hedge trimmer dry and unavailable for
children. Keep the blade lubricated. Use the transport
protection when the machine is stored.
12. Specifications
Model HTX2000
Battery type Lithium Ion
Battery nominal voltage 20V
Capacity (2 Ah)
Blade speed 1300 min
-1
Blade length 51 cm
Net weight (tool only) 2.1 kg
13. Warranty terms and conditions
The warranty period is 2 years for private end users in
EU countries. Products sold for commercial use, only
have a warranty period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more than
12 months:
•
Blade/bar
•
Blade tip protector
•
Battery: If the battery is not stored correct (frost-
free and recharged every 3 months), the durability
is only guaranteed for 6 months.
The warranty does NOT cover damages/faults
caused by:
•
Lack of service and maintenance
•
Structural changes
•
Exposure to unusual external conditions
•
If the machine has been improperly used or
overloaded
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center. Your receipt is your warranty note, why it
should always be kept safe.
REMEMBER: The purchase of spare parts as well as
any request for warranty repair, art. number (e.g.
900600XX), year and serial number should always be
informed.
* We reserve the right to change the conditions and
accept no liability for any misprints.