Tews Technologies TVME200 Series, User Manual

Page: 19 / 28

TVME200 User Manual Issue 1.1.0 Page 18 of 26
IP C Control Register VME A16 Base A 0x02C3
Bit Symbol Description Access Reset Value
7 IP C, Reset 1 = reset is initiated
Remains ‘1’, until the IP reset has been completed
and is then set to ‘0’ by the on board logic. It can
be read to verify the status of the reset.
R/W 0
6 reserved R undefined
5 reserved R undefined
4 reserved R undefined
3 reserved
Carry random information
R undefined
2 IP C, Error 1 = error signal is active R 0
1 IP C, INT1 R 0
0 IP C, INT0
Interrupt status
1 = indicates a pending interrupt request
R 0
IP D Control Register VME A16 Base A 0x03C3
Bit Symbol Description Access Reset Value
7 IP D, Reset 1 = reset is initiated
Remains ‘1’, until the IP reset has been completed
and is then set to ‘0’ by the on board logic. It can
be read to verify the status of the reset.
R/W 0
6 reserved R undefined
5 reserved R undefined
4 reserved R undefined
3 reserved
Carry random information
R undefined
2 IP D, Error 1 = error signal is active R 0
1 IP D, INT1 R 0
0 IP D, INT0
Interrupt status
1 = indicates a pending interrupt request
R 0
Figure 4-4 : IP Control Registers (IP C / IP D)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com