TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 203 / 312

Maintenance
07/05/2018 203
8.4.1 Checking the lighting system
2 1
Fig. 263
1. Check the lighting system for damage. (Warning stripes, cables, connectors,...)
2. Check that the lighting system is working:
n Brake light 12V//21W (Fig.263/1)
n
Dipped beam 12V/10W (Fig.263/2)
8.4.2 Frame attachment
1
Fig. 264
1. Tighten all frame attachments (Fig.264/1) with the correct torque (
Ä
Chapter
8.4.3 „Tightening torques”, on page 203).
8.4.3 Tightening torques
WARNING
Danger through incorrect tightening torques!
If screws are tightened with the incorrect tightening torque, components can come
loose and cause injury and damage.
– Never exceed the maximum allowable tightening torque.
– Regularly double-check the tightening torques.
– Always observe the applicable guidelines and design criteria for threaded con-
nections.
The table lists the tightening torques required for reaching the maximum permiss-
ible pretension for the fastening screws on the transport frame.
Screw size Screw quality Tightening torque
M12 10.9 125 Nm
M20 Special screw 250 Nm