background image

5

Connecting the subwoofer

Danger

Danger of injury/damage!

Arrange the cables so that they do not pose a 

trip hazard.

1. Pull the power plug of all devices to be connected out of the 

socket to prevent accidental activation.

2. Connect the LINE IN jacks 

6

 of the subwoofer to the 5.1 

output jacks of a preamplifier, such as a DecoderStation or 

ControlStation, using the enclosed RCA connector cables. 

In the process, make sure that you always connect jacks 

of the same name with each other (e.g. Center / Center or 

Subwoofer / Sub).

Connecting satellite speakers

Make sure the polarity is correct!

Connect the like coloured terminals. Otherwise the 

sound quality will suffer. 

The strands of the speaker cables are marked with different 

colours or shapes.

1. The connector terminals 

4

 for the satellite speakers are 

located on the back side of the subwoofer. 

Run the enclosed speaker cables from the subwoofer to 

each satellite speaker. 

Small tip: Label the cables on the subwoofer side. This will 

help when taking down and setting up the system.

2. Split the speaker cables down to approx. 30 mm on both 

ends and remove approx. 10 mm of insulation.

3. Twist the stripped cable ends so that no wires are protruding. 

Tin coating is not necessary.

4. Push down the connector terminal levers and run the 

stripped cable ends into the corresponding holes. When 

releasing the lever, the cable ends will be locked. 

Connect all cables to the subwoofer in this way.

5. Connect the other ends of the speaker cables to the satellite 

speakers. You should find notes on the procedure in the cor-

responding operating instructions.

Connecting to a power supply

•  Ensure that the mains switch 

10

 “Power” on the subwoofer is 

switched off (“0 OFF” position).

•  Connect the mains connector jack 

8

 with a mains socket 

using the power cord.

•  In addition, reconnect the power plug of your preamplifier 

(DecoderStation or ControlStation) to the socket.

8

10

Pre Out

Front

Left

Right

Center

Rear

Front

Center

Rear

Front

Sub

Rear 

Front

Sub

Rear

Coaxial 2 Optical 1 Optical 2 DC +12 V/1A

5.1 In

Aux

CD

TV

Coaxial 1

Stereo In

Digital In

DecoderStation/ControlStation

Subwoofer US 2108/6 SW

6

4

Summary of Contents for US 2108/6 SW









Reviews: