15
• RADIO ONE
4.3 Powering on or off
the speaker
After plugging in the speaker, press
the volume wheel for 2 seconds
to switch on the speaker. The LCD
Display shows “HELLO”and the last
source you were listening to is active.
NOTICE
The speaker automatically
shuts itself off to standby
after 10 minutes without
audio signal and user
operation. You can press on
the volume wheel (power on)
or by selecting the speaker
from a BT device that was
already connected before to
wake the speaker.
4.4 Controlling the
volume
Rotate clockwise or counterclockwise
to increase or decrease volume.
VOLUME - 0 (Mute) to 32 (loud)
appears on the display to indicate the
level.
4.5 Setting the Sleep
timer
Press Sleeptimer button to set the
speaker to shut off after a selected
period of time. The status LED above
the button fades in and stays on
until timing is reached. After the
timing is reached, the music fades
out, status LED for sleep timer
fades out and the speaker goes
into standby (sleep timer happens
once and is deactivated after event).
To cancel the sleep timer, press
the button again to deactivate it.
Also, you can press the button for
2 seconds to change default time
(15min/30min/45min/60min/
90min).
