Tetra Pak HOYER COMET N, Manual

Page: 17 / 151

3-8
Tetra Pak
Hoyer
CN 03 C A 01
Fig. 3.11
3.8 Instructions on ban and danger signals
WARNING:
The tray-carrier belt is equipped with intermittent
motion and it presents the dragging hazard.
Never put tools, mechanical parts or other material
on the trays during the production cycle. Never
intervene on trays in motion, by removing
products or other.
WARNING :
The flaps of the power appliance panel can be
opened with suitable tool kits.
The opening of the flaps entails isolating the
components downstream of the master switch.
Certain components are subject to residual electric
energy for a defined time.
After opening, do not touch the internal parts for
at least 5 minutes.
A sign of high-voltage components is placed on
the flap.
WARNING :
The lateral protection of the kinematic
mechanisms in connection with the trays is not
allowed with these types of extrusion, dispensing,
lid-loading and dispensing stations.
A crushing hazard signal is placed on the fixed
protection.
WARNING :
The lateral protection of the kinematic
mechanisms in connection with the trays and the
delivery is not allowed with this type of cone/cup
unloading stations.
A sign of machine members in motion is placed
on the fixed protection.
WARNING :
The lateral protection of the kinematic
mechanisms and the high temperature of the
pressing masses in connection with the trays and
their release is not allowed with this type of lid-
foil sealing stations.
Signs of crushing hazards and risk of extreme
high temperature are placed on the fixed
protection.