Tether Tools AIR DIRECT, User Manual

Page: 7 / 19

Chapter 2 Getting Started
2.1 Install battery
Get the battery from the packing list and find the triangular arrow mark indicating the direction of the
battery. Push the battery into the AIR DIRECT battery compartment in the direction of the arrow as shown
below.
2.2 Power on
Turn the power switch OFF->ON, the battery LED will be light on according to the current battery level.
The Wi-Fi LED will enter the flashing state within 10 seconds, prompting Wi-Fi to initialize, and the
flashing state will be finished. The steady state indicates that the Wi-Fi is booting normally.
2.3 Connect Camera
2.3.1 Connect AIR DIRECT to camera
Connect AIR DIRECT to the camera using the Type-C data cable in the package list and turn on the
power switch of the camera.
Battery