Tetan KP 12-ES, Service And Operation Manual

Page: 32 / 80

Automatic boiler for wood pellets
31
6.4 INSTALLATION OF SECONDARY CERAMIC GRATE
Individual parts of secondary ceramic grate on the picture.
Picture No. 26 Parts of secondary ceramic grate
Function as such of these parts is as follows:
- increase turbulence of combustion products before entry to the exchanger
- use additionally the so far unburnt residues of the gaseous combustible on the ceramic burning surface
- direct the flow of combustion products through the exchanger.
Installation of grate in to working surfase is done trought cleaning door of the boiler. Individual parts has to lift in
the angle and place in back part of the burning chamber upwards. After is pushed all the way up to ceiling of a
burning chamber the front side of the ceramic has to lift up in to a horizontal level and than place the ceramic
part downwards in to s grooves. Grooves of the ceramic grate are in front and back side of a burning chamber.
Steps:
Picture No. 27 Ceramic grate parts placement guide