TESTO 350 Maritime V2, Instruction Manual

Page: 59 / 106

6 Using the product
59
1. Select analog signal (±1 V, ±10 V, 0…20 mA) at power cable
0554 0007.
Calling up the function:
>
[ ]
→
Device settings
→
[OK]
→
Analog input
→
[OK]
.
Configuring the analog input:
1.
Measurement parameter
→
[Edit]
.
2. Enter or set values: [▲] , [▼] , [ ◄ ] , [ ► ] → [OK] .
3. Save the entry: [Finished] .
4. Entry of min. and max. measure value limit ( Min0V or Min0mA )
→ [Edit] .
5. Enter or set values: [▲] , [▼] , [ ◄ ] , [ ► ] → [OK] .
6. [Finished] .
6.1.2.13. Data bus
Bus address
See Connection using a Data bus cable (accessory part to a bus
system), page 36.
Bus rate
See Connection using a Data bus cable (accessory part to a bus
system), page 36.
6.1.3. Fuels
The fuel can be selected. Fuel-specific coefficients (such as O
2 ref
,
CO
2 max
and SO
2 max
) can be set.
Besides the already pre-configured fuels, up to 5 more fuels can be
configured in a customized way (e.g. with the testo easyEmission
software). Fuel parameter, see www.testo.com/download-center
(registration required).
In order to maintain the measuring accuracy of the
instrument one must choose or configure the correct fuel.
Calling up the function:
>
[ ] → Fuels → [OK] .
Activating fuels:
> Select the fuel → [OK] .
- The fuel is activated and the main menu is opened.