Multi Station
Vicat Test Apparatus
46
5.6.3 Cleaning or Changing the brush (washing unit for cone)
The brush can be removed for cleaning together with bracket, if necessary.
Demount the bracket for changing the brush.
Figure 51: brush change in washing unit for cone
Note
After cleaning the brush holder, put it back into receptacle and screw the receptacle into
the washing unit by rotating it counterclockwise.
Do not tighten the receptacle!
Dryer gadget for cone
To clean the brush holder,
turn it until the screw heads
are free, and pull it out then.
The receptacle with the brush holder can
be screwed out by clockwise rotation.
When the brush is worn up, the brush
holder can be removed by unscrewing
the screws to change the brush.
To change the
sponges, remove the
lock washers and pull
the sponge upwards.
For insertion, all 4
sponges are recom-
mended to be put in
together.
lock wascher
sponge
