Automatic
Vicat Needle Apparatus
1.0306
7
1.6 Scope of delivery
In the standard version, the Automatic Vicat Needle Apparatus is delivered with the fol-
lowing accessories:
Container for water storage
Diagram recording paper (500 sheets)
Recording stylus with ball-pen recorder and propelling-pencil leads (leads for me-
chanical pencil)
Drop rod
Ring according to EN: diameter 70 / 80 mm
Needle, with diameter 1.13 mm x 50 mm length
Allen wrench (socket wrench) (size no. 2)
Available as options:
Needle, with diameter 1.13 mm x 30 mm, with special foot
Consistency plunger
Timer switch
1.7 Electrical connections
Danger
In accordance with the pertinent standards, the yellow-green connec-
tion terminal must be connected to the earthing system before addi-
tional electrical connections are made.
Before making the electrical connections. Also check the machine rat-
ing plate to make sure that the ratings of the building power supply
conform to the requirements of the product for voltage, wattage, am-
perage, and frequency.
The technical characteristics of this safety device must also satisfy the
standards that apply in the country in which the machine is installed.
Caution
The manufacturer of this product cannot be held liable for any damages
that result because the information here is not observed.
Actual voltage:
10% of the rated voltage
Frequency: 50 Hertz
1% of the rated frequency, continually;
2% of the rated fre-
quency, on a short-term basis
The manufacturer shall not be liable for damages to persons or property that arise be-
cause the above instructions have not been observed.
We recommend the use of a residual-current-operated circuit-breaker (RCCB) with
30-mA rated residual-current trip.
