Automatic
Vicat Needle Apparatus
1.0306
6
If there are no shortcomings, and if there are no transport damages, then use the bill of
delivery to make sure that the consignment is complete, and that all parts have been de-
livered.
If you assume or suspect transport damage, or if transport damage becomes apparent
only after you have accepted the delivery, immediately make an exact report of the condi-
tions and any damage as they exist. Send us this report immediately by fax or e-mail.
Important: Absolutely do not make any changes to the delivered goods.
After we have studied your report, we can make a decision whether we can correct the
difficulties by one of the following options:
Deliver spare parts to you, or
Send a specialized fitter/installer to your plant, or
Ask that you return the system to us for repair.
1.5.2 Transport
This system can be moved by hand to the place where it should be installed. Its weight
(mass) is approx. 16 kg.
1.5.3 Setting up the system
Set up the system on a level base that is that not subject to vibrations, and that can effec-
tively support the weight of the unit.
The ambient conditions that must be observed are as follows:
Permissible temperature conditions:
From + 5 °C to + 40 °C
Permissible relative humidity:
30 ... 50%
Maximum elevation:
1,000 metres above sea level
Caution
Be sure to take all normal and logical precautionary measures to en-
sure that the equipment is not subject to impact, and that it is not dam-
aged in any other way.
We recommend that the Automatic Vicat Needle Apparatus be placed on a work
desk, so that the drum with the plot of measuring results is located at a conven-
ient level for the operating personnel.
The main working position for the operating personnel is in front of the device.
