Automatic
Vicat Needle Apparatus
1.0306
15
3.4 Calibration of the needle
The Automatic Vicat Needle Apparatus is set at the manufacturer’s plant in accordance
with the heights of the needles as they are delivered. As a result, the User does not need
to make any adjustment settings under normal conditions.
If, however, any deviations are discovered and the User must make adjustments to the
needle calibration, then he should follow the steps below:
1.
Remove the fall rod upward as shown in the drawing below (arrow 1 below).
2.
Unscrew the countersunk-head screw on the drum (arrow 2 below).
3.
Remove the 4 screws from the side wall of the upper part of the device (arrow 3
below).
2
1
3
