Laboratory mortar mixers
Model 1.0204.LV
12
user must be carefully trained, in order to operate the machine and safety equipment
with which the machine is equipped, in order to avoid an incorrect use. Safety equip-
ment must always be installed and checked daily.
Manipulations and modifications to the machine (electrical, mechanical changes, etc.)
that have not been authorized in a written agreement by the manufacturer are consid-
ered to be prohibited and the manufacturer does not accept any claims for damages.
Ensure that no hazardous situations occur during the work. Stop the machine imme-
diately if it does not work properly, and immediately notify the manufacturer or their
authorized service personnel.
Do not place any wires or tools in the existing openings.
4.5 General safety instructions
Warning
All instructions must be read. Failure to comply with the instructions
that are described below could cause electric shocks, fires and/or
serious injuries.
1) The workplace
Keep your working area clean and tidy. Disorder and unlit work areas may result
in accidents.
Do not work with the mortar mixer in hazardous environments where there are
flammable liquids, gases or powders. Electrical tools produce sparks that may ig-
nite the powder or vapors.
Keep children and other persons away from the device during use. You could lose
control over the device if you are distracted.
