To install an aero cover:
1. Align the aero cover into position so that
the notch at the base of the Tesla "T" is
aligned with the tire's valve stem.
2. Push firmly around the perimeter of the
aero cover until it fully snaps into place.
For Gemini wheels, press on the perimeter
of the cover until it aligns with the wheel
surface. Press on the Tesla “T” in the
center until the cap snaps into place. See
Parts and Accessories on page 229
for
more information.
CAUTION:
To prevent the aero
cover from falling off, ensure that
it is fully secured before driving.
Removing and Installing Lug Nut
Covers
If your Model X is equipped with lug nut
covers, you must remove them to access the
lug nuts.
To remove a lug nut cover:
1. Insert the curved part of the lug nut cover
tool, if equipped (located in the glovebox
in some vehicles, or you can use a small
allen wrench) into the hole at the base of
the Tesla "T".
NOTE:
The lug nut cover tool can also be
purchased at an auto parts store or
through online retailers.
2. Maneuver the lug nut cover tool so that it
is fully inserted into the hole in the lug nut
cover.
3. Twist the lug nut cover tool so that the
curved part is touching the middle of the
lug nut cover.
4. Firmly pull the lug nut tool away from the
wheel until the lug nut cover is released.
To install the lug nut cover:
1. Align the lug nut cover into position.
2. Push firmly on the lug nut cover until it
fully snaps into place.
CAUTION:
Make sure the lug nut
cover is fully secure before driving
to prevent it from falling off.
Wheel Configuration
If you are installing new wheels or swapping
them for different ones, update your vehicle's
wheel configuration by touching
Controls
>
Service
>
Wheel Configuration
. This allows
Model X to learn the new wheels and provide
more accurate status updates on your vehicle.
Select a wheel from the drop down menu that
matches the new wheels you plan to install on
Model X. Selecting new wheels in the wheel
configuration also changes the wheels that
appear on your vehicle's avatar on the
touchscreen.
Ensure you are aware if your vehicle is
equipped with staggered wheels, meaning
the wheels are different sizes in the front and
rear. Check the front and rear tire sizes
marked on the tire sidewall to see if they
match or are different sizes. If the wheels are
staggered, take extra precaution to ensure
the new wheels you install are staggered in
the same way as the previous wheels.
Tire Care and Maintenance
216
MODEL X Owner's Manual
