Second Row Outboard Seats (Bench Seats)
Infants and children can occupy a second row outboard seat using either belt-based, or ISOFIX (IU), or i-Size (i-U)
child restraint systems. The second row outboard seats support the use of the following ISOFIX size classes:
• Size class A*, B, and B1 forward-facing.
• Size class C*, D and E rear-facing.
• Also compatible with AS/NZS 1754 child restraint systems Type A, A2, A4, B, D, E, and F.
Larger children can also occupy a rear outboard seat using a Type B2 booster seat, attached as described in the
instructions provided by the child restraint system manufacturer.
NOTE:
To accommodate large rear-facing ISOFIX child restraint systems (size class C), you may need to move the
corresponding front seat forward to the mid-track position (up to 13 cm forward of the rearmost position), raise the
seat upward (3 cm from its lowest position), and angle the seat back to 15 degrees (or 10 degrees rearward from its
forward-most position).
NOTE:
The second row outboard seats support the use of upper tether straps (see
Attaching Upper Tether Straps on
Child Safety Seats
38
MODEL X Owner's Manual
