Qg 2 Multi-Sync Gateway User Guide
Command Reference
SJC-DEV7250-HR Rev. 1.14
15
4
Command Reference
4.1
Ts2 Basic Commands
The login credentials for accessing Ts2 CLI shell is admin/admin. This is a list of the available commands
related to the control and monitoring of the Ts2. The CLI commands are case insensitive.
4.1.1
Help Command
After logging in, the user can enter “help” to get a list of commands and descriptions to be displayed on
the command terminal.
Figure 5 Help Command
4.1.2
History Command
To view the history of previously entered commands, enter “history”.
Figure 6 History Command
4.1.3
Quit Command
To terminate the command session and log out, enter “quit”. Note that, pressing Control-C will have the
same effect as “quit” command.