Tescom TC-5972DP, User Manual

Page: 55 / 63

6. Maintenance
Maintenance
47
6.1 Maintenance
TC-5972DP Pneumatic Shield Box is designed and built for long life and easy maintenance.
Optimal RF shielding is obtained by using gaskets between the body and the lid. Clean them at least
once a month as directed below to maintain Shield Box in good condition. They must be checked
periodically for wear and tear which would compromise the performance.
Check List for Maintenance
●
Check for loose screws and tighten with proper tools, if necessary.
●
Check for a loose connection. If a loose connector is found, tighten the connector with proper tools.
●
Check for a damaged cable, especially near the connector-cable neck. Replace any damaged cables
found.
●
Visually inspect the RF seal (gasket) between the Shield Box body and lid for wear and tear.
●
If there is excessive amount of dust or foreign substance on the aluminum surface (especially parts
contact with gaskets), wipe it out with dry cloth.
Figure 6-1 TC-5972DP Gasket Locations