![Tescom TC-5972DP User Manual Download Page 44](http://html1.mh-extra.com/html/tescom/tc-5972dp/tc-5972dp_user-manual_1090868044.webp)
36
RS-232C Command List
5.5 RS-232C Command List
Table 5-2
List of RS-232C Commands for TC-5972DP
Category
RS-232C Command
Response
Description
System
MODEL?
Name+Date
Verify model name, firmware
version and date.
COUNT?
Numeric 8 digits
(ex: 00000001)
Display cumulative number of
lid operation.
Configuration
(Handler &
Probe)
SOLENOID MODE?
Handler:xxx, Probe:xxx
xxx: {OFF|TIMER|SENSOR}
Check Handler and Probe
Mode.
HANDLER MODE
SENSOR
OK
Set Handler Mode to Sensor
Mode.
HANDLER MODE OFF
OK
Set Handler Mode to Off
Mode.
PROBE MODE SENSOR
OK
Set Probe Mode to Sensor
Mode.
PROBE MODE TIMER
OK
Set Probe Mode to Timer
Mode.
PROBE MODE OFF
OK
Set Probe Mode to Off Mode.
Lid Operation
Commands
LID?
OPEN | CLOSE
Check the current lid status.
OPEN
OK | ERR50
Open the lid.
CLOSE
READY | ERR20 | ERR30 |
ERR60
Close the lid.
Handler
Operation
Commands
HANDLER?
INWARD | OUTWARD
Check the current Handler
status.
INWARD
OK | ERR20 | ERR40
Push the Handler in.
OUTWARD
OK | ERR40 | ERR90
Drag the Handler out.
Probe Operation
Commands
PROBE?
UPWARD | DOWNWARD
Check the current Probe
status.
UPWARD
OK | ERR40 | ERR90
Lift the Probe up.
DOWNWARD
OK | ERR30 | ERR40 |
ERR90
Lower the Probe down.
Pass/Fail
(While The Lid is
Closed)
PASS
OK | ERR40 | ERR50
Turn the green Pass LED on.
Then open the lid.
FAIL
OK | ERR40
Turn the red Fail LED on.
Summary of Contents for TC-5972DP
