Tescom TC-5972DP, User Manual

Page: 10 / 63

1. Introduction and Specifications
Introduction
2
1.1 Introduction
Shield Box is an equipment that shields wireless products from RF interference which flows in by
radiation or through I/O cables while running tests.
Shield Box is highly effective in shielding as well as being small and sturdy. Therefore, it offers efficient
and economical testing solution for mass production, service, and development.
Key Features
●
High RF Shielding
●
Pneumatic control of lid open-close and diverse fixture motions
●
EMI filters on all Data and DC lines
●
Easily customizable to meet various test needs
●
Red and Green LED’s for Pass/Fail indication
●
RS-232C Remote Control
●
High performance absorber for radiation testing
1.2 Specifications
Mechanical Specifications
RF Connectors without I/O Interface Panel
Four(4) N(f) outside and SMA(f) inside
Input Voltage
24 VDC
Power Consumption
Max 1.5 W
Remote Control
RS-232C, 3 wire, DB9(s)
Air Connector Main connector
6 mm OD hose, one-touch push-on fitting
Fixture control connector
4 mm OD hose, one-touch push-on fitting
Input air pressure
5 to 10 bar