background image

Possible cause

Solution

Issue

No air blows out.

A foreign object can be heard moving inside 

the main unit.

For the following people, the effect of negative ions may not readily appear:

*People with curly hair, twisted hair, thin and soft hair, or short hair.

*People with recently straightened hair or semi-wet hair.

Alert: Do not use this appliance near bathtubs, showers, 

basins or other vessels containing water.

This symbol means do not use this appliance near water.

NTID721

Safety Warnings

Product name

Dimensions

Power Source

257 (H) x 157 (W) x 84mm (D) (Main unit only)

Overheating prevention device (Thermostat and temperature fuse)

Ion Hair Dryer

Product number

NTID721

AC220-240V, 50/60Hz

Power consumption

1100-1300W

Warm air temperature

115°

o

C (3-Silent ON, in an ambient temperature of 30°

o

C)

Weight
Safety features

490g (Main unit only)

Specifications

For household only

User Manual

Ion Hair Dryer

How to use

Troubleshooting

Make sure the switch is set to 

0

 before plugging in the unit.

Insert the power plug into an AC outlet.

Set the switch to 

3

2

 or 

1

 and blow hair with the dryer.

3

Suitable for blowing after washing hair.

Set switch to 

0

 after use, and 

unplug the unit from the AC outlet.

2

Gentle blowing for easy styling suitable for 

hair setting.

1

After setting hair with 

2

, switch mode to 

1

 

and apply cool air for 10 to 15 seconds to 

maintain a hair setting for a longer period of time.

Main unit and attachments

Air intake

Turn off and unplug the unit, and only begin maintenance when it is cooled down.

Maintenance

Part names and functions

When folding or 

unfolding the grip, do 

not place your fingers 

on the shaded area.

To fold

To unfold

0

Switch

3

2

1

0

Silent switch

Airflow can 

be changed 

by pushing 

this button

Main unit

Grip

Bush

Hook

Power cord

Power plug

Air 
intake

Air outlet

Moist Hood

Moist Hood is removable

*High temperatures: Do not touch 

the hood while in use or 

immediately after use.

When the “Low noise” switch is ON, the airflow is reduced for 

use at low noise levels.

Before use, please read this manual and be sure to use the 
appliance properly. The manufacturer assumes no responsibility 
for the appliance when it is used in ways other than the proper 
method described in this manual. In particular, be sure to read the 
Safety Warnings.
Store the manual in a location where it can be easily accessed at 
any time.

Always use with AC220-240V.

Before use, make sure that power cord, plug and main unit are not 

damaged.

After use, turn off and unplug the unit.

Do not leave the appliance with the power cord wound around the 

main unit.

Do not block the air intake or outlet.

Do not look into the air outlet while it is in use.

Do not put hairpins or any other foreign objects into the air intake or 

outlet.

Do not leave the appliance near bedclothes, paper or inflammable 

items when it is turned on. Do not use the appliance near gas or any 

other object that may catch fire.

Do not immerse the appliance in water or liquid or let it get wet. Do not 

use the appliance if your hands are wet.

Do not store the appliance near a bathtub, a place of high humidity or 

water.

When the appliance is used in a bathroom, unplug it after use since 

the proximity of water presents a hazard even when the appliance is 

switched off.

For additional protection, the installation of a residual current device 

(RCD) having a rated residual operating current not exceeding 30 mA 

is advisable in the electrical circuit supplying the bathroom. Ask your 

installer for advice.

If the appliance does not operate normally, immediately turn it off and 

unplug it.

Do not attempt to disassemble or repair the appliance. Leave repairs 

to an authorized repair technician.

If the supply cord is damaged, it must be replaced by the manufacture, 

its service agent, or similarly qualified persons in order to avoid a hazard.

This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of 

experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a person responsible 

for their safety.

Children should be supervised to ensure that they do not play with the 

appliance.

Do not use the appliance in a place that is accessible by children. Do 

not store the appliance in a place where children can reach it.

Do not rub the air intake too hard. If the air intake is damaged, imme-

diately stop using the unit.

Do not touch the appliance with any hair-coloring agents.

Do not drop the unit or subject it to strong shocks. Do not pull the 

power cord.

Always hold the hair dryer at least 10cm away from hair. Pay attention 

so that hair is not pulled into the air intake while in use.

Clean the air intake regularly (at least once a month). Do not use 

alcohol, benzin or nail polish remover to clean the appliance.

Do not use the appliance for/in a work environment. Do not store it in a 

location that is accessible by an unspecified large number of people.

Negative ions generated by dryer 

protect cuticles

Wipe away stains gently with a dry and soft cloth.
If stains persist, wipe with a soft cloth immersed in soapy water 
or neutral detergent diluted with water, only after wringing well.

Remove any dust or hair with a vacuum cleaner or a soft cloth 
that has been soaked in water and tightly squeezed.

Blows hot and cool air. 

Sparks can be seen 

from the air outlet. 

(Sparks are caused by 

the operation of the 

safety device).

The main unit or hot air 

is abnormally hot. The 

inside of the main unit 

becomes red or 

generates smoke.

Air comes out but stops 

from time to time.

Power plug is abnor-

mally hot.

The end of the power 

cable or power plug is 

deformed or damaged. 

The power cable is 

twisted and does not 

return properly. 

Dust or hair is 

attached to the air 

intake.

Air intake is blocked.

The safety device is 

not operating 

normally.

Power cable is 

broken.

The power cable is 

about to get discon-

nected.

The plug is 

connected to the AC 

outlet in a loose 

manner.

Clean the air intake. If 

the problem persists, 

immediately stop using 

the unit.

Use the unit without 

blocking the air intake. If 

the problem persists, 

immediately stop using 

the unit.

Immediately stop using 

the unit.

The AC outlet may have 

a problem. Consult an 

electronics appliance 

store.

Power cord length 1.7m

Reviews: