5
6
2
Caution
Display panel
Power lamp
Temperature
display
Power code
Main unit
Heat plate
Temperature
control lever
Hot pot
Handle
Lid
Lid knob
Grooved plate
This lights up when the power is ON. In use, it
turns ON and OFF to control the temperature.
The red bar moves in conjunction with the temperature
control lever, enabling the temperature setting to be
confirmed.
The lid is slightly smaller than the rim of the
hot pot and grooved plate, in order to
release steam.
Method of use
Preparation
When using the appliance for the first time or for
the first time after a long period of non-use, wash
the lid, hot pot, and grooved plate before using.
Do not use the appliance with the hot pot stacked
on the grooved plate.
1
Place the hot pot or grooved plate
on the main unit.
Confirm that the temperature control lever is
set to “OFF” and insert the plug into an outlet.
The hot pot and grooved plate are coated with
fluororesin.
Metal spatulas or utensils may scratch the
surface. Use plastic or wooden utensils.
Do not scrape the surface with sharp items
such as a knife or fork.
Do not allow leftover food (liquids) or
unclean areas to remain in the appliance.
Part names and functions
Wipe off any foreign material or water between the
heat plate and hot pot/grooved plate.
注意
各部位名稱及功能
顯示板
通電燈
溫度顯示
通電時亮燈。使用時，因為調節溫度的
緣故，會時亮時滅。
紅色標條會隨著調溫鈕移動，
可以由此確認設定的溫度。
電源線
底座
電熱板
調溫鈕
鴛鴦鍋
鍋柄
鍋蓋
鍋蓋頭
溝槽式燒烤鍋
為了預防蒸氣流失，而設計成小孔。
使用方法
準備事項
若第一次使用或久未使用時，使用前請先將
鍋蓋、鴛鴦鍋、溝槽式燒烤鍋清洗乾淨。
請勿將鴛鴦鍋和溝槽式燒烤鍋疊在一起使用。
將鴛鴦鍋或溝槽式燒烤鍋裝在底座上。
確認調溫鈕在「OFF」的位置後，將電源插頭插入插座。
裝之前請將電熱板和鴛鴦鍋之間的異物和水分擦乾淨。
鴛鴦鍋及溝槽式燒烤鍋均為氟素樹脂塗層加工。
使用金屬的鍋鏟或筷子，可能會造成損傷。
請使用樹脂或木質的烹調器具。
請勿使用刀、叉等銳利的器具刮擦。
請勿將烹調食品殘留的湯汁或污垢放置不管。
