1
10
Warnings
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly
qualified persons, so as to ensure the avoidance of
any hazard.
Check the following points, and if the appliance still does not work well, stop using it immediately.
The power cord is not plugged
into the outlet.
Plugging the power plug into
the outlet.
The temperature control lever is
set to “OFF.”
Any of the above does not apply.
Setting the temperature control
lever to the desired temperature.
Immediately stop usage.
Immediately stop usage.
The temperature does not
increase.
The power lamp does not
turn ON.
This is caused by the thermal
expansion of the heat plate. This
is not a failure.
Continue usage.
The appliance makes a
clicking sound while in use.
This is because the temperature
control function is working. This is
not a failure.
Continue usage.
The power lamp keeps
turning ON and OFF.
Smoke is generated.
The power cord does not return to its original shape after being
twisted.
The power plug is abnormally hot.
There is any other damage, deformation, or abnormality.
Any other usage may cause electric shock or fire.
Completely insert the plug into the outlet.
Otherwise, fire, electric shock, burns, or short-circuits
may result.
Long or improper use may cause the power
code to become disconnected. Do not use
the appliance when any of the following conditions are
noticed.
Intermittently stopping operation while in use
When the power code does not return to its original
shape after being twisted
When the bend protection sleeve near the plug is
deformed or damaged
When the cord cannot be inserted firmly into the
electric outlet
Any other usage may result in fire.
Always use with AC220–240V.
Use a single outlet with a rated current of
at least 15A.
Avoid handling the power
cord in any of the following ways.
Forceful bending
Twisting
Pulling
Placement under a heavy object
Placement close to heat
Pinching
Altering
Using while bundled
Thoroughly read these Safety Warnings before use, and use the appliance properly.
The precautions described herein are designed to help the user operate the appliance properly and
safely, as well as to prevent injuries to the user/others and damage to property. Be sure to observe
these precautions.
If…
Please try…
Possible cause
Safety Warnings
Troubleshooting
下列情形時
請依照下述方法處理
可能的原因
使用前，請在仔細閱讀本「安全注意事項」，並且正確使用。
此處列舉之注意事項，是為了正確且安全地使用本產品，
防範對使用者本人及他人造成危害或財產損失於未然。請務必遵守。
警告
安全注意事項
為了避免發生意外，當電源線破損時，
務必請經銷商或同等資格的人員進行更換。
懷疑可能是故障時
請確認下列事項，若依然未好轉，請立即停止使用。
電源插頭從插座上拔下。
將電源插頭插入插座內。
溫度調節鈕在「切」的位置。
不屬於上述原因。
將調溫鈕調到所需的位置。
立即停止使用。
請立即停止使用。
溫度無法上升。
通電燈不亮。
因電熱板的熱漲現象造成，
並非故障。
請繼續照常使用。
使用中發出“咔咔”的
響聲。
正在發揮調溫功能，非故障。
請繼續照常使用。
通電燈時亮時滅。
冒煙。
電源線扭曲無法復原。
電源插頭過熱。
其他出現破損、變形、異常。
可能導致出火、觸電。
請確實將插頭完全插入插座內。
可能導致火災、觸電、燙傷、短路。
長期間使用或使用不當，可能造成電源線斷裂。
若發現下列情形時，請勿使用。
使用中，時而作動時而停止
電源線扭曲無法復原
電源線與插頭的連接處變形或損傷
插座上的插頭鬆動
請勿使用交流電壓220-240V以外的電源。
請單獨使用額定電流15A以上的電源插座。
可能導致出火。
電源線相關注意事項
請勿過度彎曲電源線
請勿扭轉電源線
請勿拉扯電源線
請勿在電源線上放置重物
請勿讓電源線靠近熱源
請勿夾壓電源線
請勿改造電源線
請勿在電源線捆綁成束的狀態下使用
