background image

Possible cause

Solution

Issue

Troubleshooting

The effect of ions tends to be ineffective if the hair is charged with a 
small amount of static electricity or if the use environment does not provide 
optimum conditions. 

Hot or cool air comes 
out unintentionally. A 
spark appears from the 
air outlet.
(A spark is caused by 
the safety device.) 

Dust and hair have 
become attached to 
the air intake.

The air intake is 
blocked.

Maintain the air intake.
Remove any objects that 
block the air intake.
If this does not eliminate 
the problem, stop using 
the styler.

Immediately stop using 
the styler.

The AC outlet may have 
a problem. Consult an 
electronics appliance 
store.

The safety device is not 
operating normally.

The power cord has 
been broken.

The power cord is 
about to break.

The plug is connected 
to the AC outlet in a 
loose manner.

The main unit or hot air 
is abnormally hot.
The inside of the main 
unit becomes red or 
generates smoke.

No air blows out.

Air comes out but stops 
from time to time.

The base of the power 
cord or plug is deformed 
or damaged.

The power cord remains 
twisted.

Something sounds as though it’s moving around within the main unit. 

Power plug is abnor-
mally hot.

Summary of Contents for NACC10









Reviews: