Tescom MTP200B, Operating Manual

Page: 80 / 172

64
MTP200B BT LE Signal Generator Set-up
11.2.6 Data Length Setting
Input Data Length of BT_LE packet to be transmitted from MTP200B. Set value between 0 ~ 255 Byte.
●
Select GEN (M1) → SG → LENGTH (Default: 37 byte)
Data Length expansion function is available on DUT that supports BLE V4.2
IF a user want to test BLE V4.0 ~ V4.1, a user must set Data Length value between 0 ~ 37.
11.2.7 Number of packet Setting
Set total number of packet of BT_LE to be transmitted from MTP200B.
It is possible for user to set the number of packet 0 ~ 10.000 and MTP200B keep transmitting packet
when the number of packet is set to 0,.
(If packet is set between 1 ~ 10,000, MTP200B stops transmitting packet after selected number of pa
cket is transmitted.)
●
GEN (M1) → SG → NUM_PACKET → Set value between 0 ~ 10,000 (Default: 0)