TMB1 Mixer with Bowl User Manual
TMB1 Mixer with Bowl User Manual
TMB1 Mixer with Bowl User Manual
SAFETY GUIDE – PLEASE READ CAREFULLY
Please follow all the safety precautions listed
below for safety and to reduce the risk of injury or
electrical shock.
Read all the instructions carefully before
•
using this appliance and keep them for future
reference
Unplug the mixer from the mains supply
•
when not in use, when removing or attaching
beaters or dough hooks, and before cleaning
any part of the appliance.
This appliance is for occasional household use
•
only.
Do not use the mixer outdoors or in damp
•
conditions.
Do not immerse the motor unit or the
•
electrical cord or plug in liquids.
Do not operate the mixer with wet hands.
•
Do not use the mixer near a source of heat or
•
on an unstable surface.
Never let children operate this appliance.
•
Close supervision is necessary when this
appliance is used near children.
Ensure that the power cord does not touch
•
any hot surface and that it does not overhang
the edge of your work surface.
When unplugging the power cord, hold the
•
plug top, not the power cord.
Do not operate the mixer with a damaged
•
cord or plug or after the appliance or any
attachment has been damaged. Seek expert
assistance.
Do not use attachments or accessories which
•
are not recommended by the manufacturer.
They may cause malfunction or injury.
Store the mixer and the attachments away
•
from direct sunlight and out of the reach of
children.
Do not use the mixer with bent or deformed
•
attachments.
This appliance is not intended for use by
•
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliances by a person
responsible for their safety.
Children should be supervised to ensure that
•
they do not play with the appliance.
When operating your mixer
Avoid contacting moving parts. Keep hands,
•
hair, clothing, as well as spatulas and other
utensils away from beaters during operation
to reduce the risk of injury to persons, and/or
damage to the mixer.
Make sure that you use a bowl large enough
•
to accommodate all the ingredients and that
the bowl is sturdy enough to stand still during
the mixing process.
Switch the motor unit off when filling or
•
emptying the mixing bowl, attaching or
removing beaters.
Remove the beaters from the mixer before
•
washing.
Do not mix or blend mixtures containing fruit
•
stones, etc.
There are no user serviceable parts in your
•
mixer. Unauthorised dismantling or servicing
will void the product warranty.
Do not use the mixer for any purpose not
•
expressly specified in this manual.
BEFORE USING YOUR STAND MIXER
Wash the attachments and bowl in warm soapy
water, rinse and dry thoroughly. Wipe the motor
unit all over with a soft cloth dampened with
soapy water followed with a clean damp cloth.
Dry well. Do not immerse the motor unit, mains
cable or plug in water.
Before assembling the Stand Mixer, be sure the
power cord is unplugged from the power outlet
and the speed selector is in the ‘0’ (OFF) position.
Attaching the beaters and dough hooks
The attachments must be used in matched pairs.
Push the attachments one at a time into the
sockets in the mixer base and rotate slightly to
lock them in place. Pull each one slightly to make
sure it is fully locked.
Beaters: Beaters can be inserted into either
socket.
Dough Hooks: These must be inserted in the
correct way as the sockets in the mixer are
different sizes. Insert the hook with the washer
into the larger socket, and the plain hook into
the other socket as shown.
CONTROLS AND COMPONENTS
Eject button
1.
Turbo button
2.
Speed selector
3.
Motor unit
4.
Beaters
5.
Bowl
6.
Dough hooks
7.
Mains lead
8.
Mixer release button
9.
Stand
10.
OPERATION
Place the ingredients into the bowl.
•
Place the bowl on the stand.
•
Lower the cradle to the level position, then
•
place the mixer on the stand. First engage the
back of the mixer into the stand, then clip the
front into place.
Move the speed selector to the speed you
•
want to use and begin mixing. Always start
with the lowest speed “1”.
Do not operate the mixer continuously for more
than 3 minutes. After 3 minutes of continuous
use, allow 10 minutes for the motor to cool before
using the mixer again.
If you need to increase the mixing speed briefly,
press and hold the TURBO button. If you are
using TURBO speed, DO NOT operate the mixer
continuously for more than 1 minute.
When you have finished mixing:
Move the Speed Selector to ‘0’. Switch off at the
mains before unplugging the mixer.
Tilt the mixer out of the mixture. Scrape
•
the excess food particles from the beaters
or dough hooks with a rubber or wooden
spatula.
To remove the mixer from the stand, press the
•
release button at the back of the stand and lift
the mixer off the stand.
