OPERATIONS MANUAL
8
+1 215 785 2338
2.1 Introduction
This chapter provides instructions for unpacking and installing the Instrument. Read this
chapter before you operate the Instrument. Instructions for cable connections can be found
here.
2.2 Unpacking and Inspection
The Instrument is shipped in a container designed to prevent damage during shipping.
Inspect the Instrument carefully for damage, and immediately report any damage to the
shipper. A packing list is included in the packaging. When you unpack the Instrument, check for
all the standard equipment listed and check the shipping order for any additional items ordered.
Report any shortage to the place of purchase to your distributor or directly to TESCO.
2.3 Set up, Airflow and Cooling Considerations
2.3.1 Setup and Placement
The Instrument is suitable for bench top use if there is enough space to allow proper ventilation.
Please see suggested placement of the setup.
Figure 2.3a Benchtop Suggested Setup
IMPORTANT CONSIDERATIONS:
Since the Instrument is a benchtop
device, the table should:
1-
Be stable (should not have
loosely, shaky joints)
2-
Have table legs that are
stationary or non-rollers. In
case rollers are present,
ensure that the rollers are
properly locked to avoid
unnecessary movements.