TES TDS-32F, User Manual

Page: 16 / 23

15
2.3 On-Screen Display
The TDS-32 Lite series provide side panel controls. And the following is OSD
function table:
OSD
Key
Menu off status Menu on status
MENU Menu appear
Menu disappear/ return to main
item
▲
Brightness Main item select up/ Adjust up
▼
Contrast
Main item select down/ Adjust
down
SELECT Auto Adjusting Enter/Select sub-item function
Power On/Off
1.
Press the “MENU” button to pop up the “on-screen menu” and press “Up” or
“Down” button to select among the five functions in the main menu.
2.
Press “SELECT” to enter the sub menu , and then use “Up” or “Down” button to
select the adjustable functions.
3.
Choose the adjustment items in the sub menu by pressing the “SELECT ”
button.
4.
Adjust the value of the adjustment items by pressing the “Up” or “Down” button.
5. With the
OSD menu on screen, press “Menu” button to return main menu or exit
OSD.
6. The OSD menu will automatically close, if you have left it idle for a pre-set time.
7. To Lock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor has to be turned ON with a valid signal pre-set)
a.
Without the OSD menu on screen, press and hold “Menu” key ,and press
“POWER” once then release “MENU” key. The “Lock/Unlock” menu will
appear for 5 seconds.
b.
Use the "UP” and “DOWN key to select OSD or Power setting then set at
“Lock” (or “Unlock” ) by pushing the "ENTER" button.
c.
When pressing “MENU” button , the previous setting will be saved and
exit the
“Lock/Unlock” menu automatically.