TES MicroTouch SK-097P-A2 User Manual Download Page 19

19 

 

Warranty Information  

 

Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer, Seller warrants 
to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the 
touchscreen display and their components is three years. Seller makes no warranty regarding the 
model life of components. Seller’s suppliers may at any time and from time to time make changes in 
the components delivered as Products or components. Buyer shall notify Seller in writing promptly 
(and in no case later than 30 days after discovery) of the failure of any Product to conform to the 
warranty set forth above; shall describe in commercially reasonable detail in such notice the symptoms 
associated with such failure; and shall provide to Seller the opportunity to inspect such Products as 
installed, if possible. The notice must be received by Seller during the Warranty Period for such product, 
unless otherwise directed in writing by the Seller. Within thirty days after submitting such notice, Buyer 
shall package the allegedly defective Product in its original shipping carton(s) or a functional equivalent 
and shall ship to Seller at Buyer’s expense and risk. Within a reasonable time after receipt of  the 
allegedly defective Product and verification by Seller that the Product fails to meet the warranty set 
forth above, Seller shall correct such failure by, at Seller’s options, either (i)modifying or repairing the 
Product or (ii) replacing the Product. Such modification, repair, or replacement and the return shipment 
of the Product with minimum insurance to Buyer shall be at Seller’s expense. Buyer shall bear the risk 
of  loss  or  damage  in  transit,  and  may  insure  the  Product.  Buyer  shall  reimburse  Seller  for 
transportation cost incurred for Product returned but not found by Seller to be defective. Modification 
or  repair,  of  Products  may,  at  Seller’s  option,  take  place  either  at  Seller’s  facilities  or  at  Buyer’s 
premises. If Seller is unable to modify, repair, or replace a Product to conform to the warranty set forth 
above,  then Seller  shall, at  Seller’s option,  either  refund  to Buyer  or  credit  to  Buyer’s  account  the 
purchase price of the Product less depreciation calculated on a straight-line basis over Seller’s stated 
Warranty  Period. These  remedies  shall  be  the  buyer’s  exclusive  remedies  for  breach  of  warranty. 
Except for the express warranty set forth above, seller grants no other warranties, express or implied 
by  statute  or  otherwise,  regarding  the  products,  their  fitness  for  any  purpose,  their  quality,  their 
merchantability,  their  non-infringement,  or  otherwise.  No  employee  of  Seller  or  any  other  party  is 
authorized to make any warranty for the goods other than the warranty set forth herein. Seller’s liability 
under the warranty shall be limited to a refund of the purchase price of the product. In no event shall 
Seller  be  liable  for  the  cost  of  procurement  or  installation  of  substitute  goods  by  Buyer  or  for  any 
special,  consequential,  indirect,  or  incidental  damages.  Buyer  assumes  the  risk  and  agrees  to 
indemnify Seller against and hold Seller harmless from all liability relating to (i) assessing the suitability 
for Buyer’s intended use of the Products and of any system design or drawing and (ii) determining the 
compliance of Buyer’s use of the Products with applicable laws, regulations, codes, and standards. 
Buyer retains and accepts full responsibility for all warranty and other claims relating to or arising from 
Buyer’s products, which include or incorporate Products or components manufactured or supplied by 
Seller.  Buyer  is  solely  responsible  for  any  and  all  representations  and  warranties  regarding  the 
Products made or authorized by Buyer. Buyer will indemnify Seller and hold Seller harmless from any 
liability, claims, loss, cost, or expenses (including reasonable attorney’s fees) attributable to Buyer’s 
products or representations or warranties concerning same. 

 

 

Summary of Contents for MicroTouch SK-097P-A2






















Reviews: