Terumo BCT T-RAC II, Instructions For Use Manual

Page: 95 / 146

Page 25 of 76
4. Put the bottom side of the case on top of the
lid (which is still upside down). The lid will
serve as a table for the device.
5.12.2 Battery charging
The case features a special function which makes it possible to charge the battery
while T-RAC II is inside the case.
In order to do this, proceed as follows:
Connect the internal power cable of the case
to the power connector of T-RAC II.
Connect the power cable coming from the
power supply (which is outside the case) to
the power connector of the case.
The case can now be closed and the power supply can be connected to the mains.
5.13 T-RAC II Quad charger
T-RAC II Quad Charger is intended to charge up to 4 T-RAC II high-energy batteries
simultaneously: the operator takes the battery out of a T-RAC II device and insert it into
the T-RAC II Quad Charger.
It is a standalone accessory which is not connected with T-RAC II. Although it is a medical
device, it cannot be placed or used in the patient environment.
The device can be transported for usage at different places.
More information can be found in the separate T-RAC II Quad Charger IFU (LCT-7017).