Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 87 / 204

Stop Condition
The stop condition determines how and when the system stops performing the current task or step of a
task. There are eight stop conditions: Manual, Time, IC Volume, EC Volume, Exchange, Empty Bag,
Inlet Volume, and System. You must select a stop condition for each task or step of a task. Each stop
condition is based on specific criteria that the system must meet before the system stops and ends a task
or a step of a task.
Manual
The Manual stop condition requires the operator to stop the system manually by touching
Finish
or
starting another task. The following example shows how this operator's manual denotes the Manual stop
condition:
Manual
Selecting the Manual Stop Condition
The following instructions explain how to select Manual as the stop condition for a task or a step of a
task.
From the Setup screen:
1. Touch
Stop Condition
.
The Setup: Stop Condition window opens, as shown in Figure 6-7.
Performing Tasks
6-14 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1