Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 44 / 204

General Navigation Buttons
This section describes the general navigation buttons that appear on the Quantum system touch screen.
These buttons help you navigate the system and execute basic functions within the system, such as
entering data or confirming a menu selection.
Table 3-3: Description of the general navigation buttons
Name Function
Cancel
When touched, allows you to exit the current screen without saving
any information.
Close When touched, allows you to close a screen or a window.
Configure
When touched, allows you to configure the settings for a step of a
task.
Confirm When touched, allows you to confirm a selection or entry.
Finish When touched, allows you to manually end a task. This button only
appears when you select Manual as the stop condition.
Modify
When touched, allows you to modify a task. This button appears on
the Setup Confirmation screen, and it appears on the home screen
when the system is performing certain tasks.
Next When touched, allows you to confirm that the system should move
to the next step in a task. When a Set Management task, such as
Prime Cell Expansion Set, is in progress, this button may appear on
the system window, but it appears only during a step of a multi-step
task that is not the last step and that includes on
‑
screen
instructions.
No
When touched, allows you to cancel an action. This button appears
on all confirmation dialog boxes.
Pause When touched, allows you to pause a task.
Resume
When touched, allows you to resume the current task or step of a
task that you paused.
Save When touched, allows you to save and apply changes that have been
made to the system configuration.
Start
When touched, allows you to begin a task.
Stop When touched, allows you to stop a task. Once you touch Stop , the
system stops all the pumps, closes all the valves except for the EC
outlet valve and the air removal valve, and ends the current task.
General Navigation Buttons
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 3-7