Terumo BCT Quantum Cell Expansion System, Operator'S Manual

Page: 176 / 204

Viewing Reports
The Quantum system allows you to view the current report for any of the three report types, but only run
reports are stored and can be viewed later. The system does not store configuration reports or user
reports.
Viewing a Current Report
Complete the following steps to view a current report:
1. Touch
Utilities
.
The Utilities screen appears.
2. Touch
Reports
.
The Reports screen appears.
3. Under the type of report that you want to view, touch
View
. For example, if you want to view the
current run report, touch
View
under the Run Reports section.
The system displays the current report.
Viewing the Current Run Report from the Manage Run Reports Screen
You can also view the current run report on the Manage Run Reports screen by completing the following
steps:
1. Touch
Utilities
.
The Utilities screen appears.
2. Touch
Reports
.
The Reports screen appears.
3. Under Run Reports, touch
Manage
.
The Manage Run Reports screen appears and shows a list of all the stored run reports, as shown in
Figure 15-2 on page 15-6. The list also includes the current run report that is in progress, which is
indicated by the green dot.
4. Touch the check box next to the current run report that is indicated by the green dot.
5. Touch
View
.
The system displays the current run report.
Viewing a Stored Run Report
The system allows you to view stored run reports; however, you can view only one report at a time.
Complete the following steps to view a single stored run report:
1. Touch
Utilities
.
The Utilities screen appears.
2. Touch
Reports
.
The Reports screen appears.
3. Under Run Reports, touch
Manage
.
The Manage Run Reports screen appears and shows a list of all the stored run reports, as shown in
Figure 15-2. The list also includes the current run report that is in progress, which is indicated by
the green dot.
Viewing Reports
Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1 15-5