TerraWave Solutions
®
3.4-3.65 GHz 10 dBi WiMAX
Omnidirectional Antenna with N-Style Jack Connector
Installation Information for T35100O10006
Installation Instructions:
1) Assemble the antenna by placing the antenna’s joint sheath between the pressure plate and clamp using a
10mm box wrench.
2) Vertically install this antenna assembly to the mounting pole. Please note that it is not recommended to install
the antenna on a pole with a diameter other than the specified 40~80mm
(1.57” ~3.15”).
3) Attach the cable to the antenna. It is recommended to wrap the cable with weather-proof adhesive tape.
Other Recommendations:
1) Do not attempt to carry out the antenna installation during inclement weather.
2) Make sure the antenna is installed in a safe and suitable location that is clear from any power lines.
3) Do not attempt to install the antenna on a pole of a diameter other than the specified 50~115mm
www.terrawave.com Email: [email protected] Phone: 210-375-8482 or 800-851-4965 10521 Gulfdale, San Antonio, TX 78216
