The PHASE 24 FW as a system audio device (Windows)
If you would like to use the PHASE 24 FW not only for specific audio applications, but as
your default Windows audio device, select the PHASE 24 FW audio driver in the Control
Panel under “Sounds and Audio Devices” > “Audio” as the default device for the desired
functions.
As the PHASE 24 FW is a professional audio interface, its levels can only be adjusted
using its included Control Panel. The Windows mixer is disabled to prevent it from
adversely affecting the signal quality.
Updating the firmware (Windows)
Thanks to software technology, updates to existing standards and new functions can be
added to the PHASE 24 FW without changes to the hardware by updating its so-called
“firmware”. To update the firmware, proceed as follows:
■
Run the program “TT_FW_WinFlash_v1.0.exe”. It can be found on the driver CD in the
“Firmware” folder and can be downloaded from the Internet.
■
Click “Open” and specify the firmware file you would like to load.
■
Next, click “Upgrade Firmware” to start the update process.
■
Answer “Yes” to the safety prompt that appears now.
■
The PHASE 24 FW must be restarted after the firmware update completes success-
fully. Either disconnect the PHASE 24 FW from the computer and reconnect it, or
restart the computer.
■
In the event of a power failure during the update, or if the update does not complete
successfully for any other reason, simply repeat the update. It's not possible to dam-
age anything in the process.
14
PHASE 24 FW (English)
