Email: [email protected] www.terratekintl.com
ACL Group (Intl) Ltd
16
Changing The Grinding Wheel
Remove the 3 screws (A) holding the side section of the Wheel Guard (B) and remove the
Wheel Guard.
Undo the nut (D) (Important: The left grinding wheel is fastened with a left-handed thread and
the right grinding wheel with a right-handed thread), by holding the nut of the grinding wheel
mount on the opposite side, remove the flange (C), and replace the grindingwheel (5).
To assemble, proceed in reverse order.
Operation
ON/OFF switch (1)
To switch on the grinder set the On/Off switch (1) to position "I".
Move the ON/OFF switch (1) to position “0” to switch off the grinder.
After switching on the equipment wait for the equipment to reach its maximum speed of
rotation before commencing with the grinding work.
7
6
B
A
A
A
5
C
D
