4
EN: GAS STOVE |
User Instructions
THECNICAL CHARACTERISTICS
MODEL
TX1
TX2
TXS2
TX3
Category
I3B/P
Gas Type
LPG, G30
Working Pressure
30 mbar
Total Power
1,45 Kw
3,45 Kw
3,45 Kw
4,35 Kw
Total gas consumption
0,105kg/h
0,240kg/h
0,240kg/h
0,305kg/h
Power small burner
-
-
-
0,90 Kw
Injector
Ø
-
-
-
0,50
Gas consumption
-
-
-
0,065kg/h
Power Medium burner
1,45 Kw
1,45 Kw
1,45 Kw
1,45 Kw
Injector
Ø
0,60 mm
0,60 mm
0,60 mm
0,60 mm
Gas consumption
0,105 kg/h
0,105 kg/h
0,105 kg/h
0,105 kg/h
Power Big burner
-
2,0 Kw
2,0 Kw
2,0 Kw
Injector
Ø
-
0,75 mm
0,75 mm
0,75 mm
Gas consumption
-
0,135kg/h
0,135kg/h
0,135kg/h
MOUNTING
1.
Remove packaging carefully from the appliance.
2.
Place the appliance on a flat stable and heat-resistant surface in places protected from air currents.
ATTENTION:
It is forbidden to install the appliance in
ground floor and the like below the elevation “0”
3.
Do not place the appliance near to flammable and wooden objects.
4.
Check the Destination Country, Gas Category, gas pressure before installation.
5.
For gas supply connection always apply the regulations in force in the destination country.
CONNECTION TO THE GAS SUPPLY
ATTENTION:
Installation of these appliances must only be done by a qualified authorized service staff in the
destination country. Installation must be done according to the instructions mentioned in this
manual. For installation apply to the authorized service in the destination country.
1.
The propane-butane gas supply is carried out with standard gas cylinders by
БДС EN 1442
using a cylinder fitted
with a two-stage reducer valve certified by BDS
17269:1992
, providing a working pressure of 30 mbar.
2.
Connect the appliance to the bottle by means of a
flexible hose certified to handle
