background image

Small Directional
UHF only HDTV Antenna Pro

TV32

OWNER’S MANUAL

Performance Specifications

TERK is a registered trademark. The TERK logo is a trademark of the TERK Technologies Corp.

Type:  4 bay-UHF only
Active Elements: 13
Antenna Selector: Lt Green
Dimensions: 

Height: 34"
Width: 22"

Turning Radius: 11

1

/

4

TERK and TERK Technologies are trademarks of TERK Technologies Corp.
Commack, NY ©2003 TERK Technologies Corp. Made in USA.
For additional information: call 1.800.942.TERK (8375) or visit www.terk.com.

113P006

Limited Warranty

TERK Technologies Corp. (TERK) warrants this product against defects in
materials or workmanship for one (1) year from the date of purchase. During
this warranty period, this product will be replaced without charge. This
warranty does not cover any damage due to acts of nature, commercial use,
accident, misuse, abuse or negligence. This warranty is only valid in the USA.
Replacement as provided under this warranty is the exclusive remedy of the
consumer. TERK shall not be liable for any incidental or consequential damages
for breach of any express or implied warranty on this product, except to the
extent that limitations of this sort are prohibited by applicable law. THERE ARE
NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURCHASE EXCEPT TO THE EXTENT THAT IMPLIED WARRANTIES
OF EITHER SORT ARE REQUIRED BY APPLICABLE LAW, AND IN SUCH CASE,
EACH WARRANTY IS LIMITED IN DURATION TO ONE YEAR.

1450184

T0278-TV32-.qxp  7/11/03  04:20 PM  Page C4

Summary of Contents for TV32









Reviews: