Terex TL160, Operating Manual

Page: 35 / 114

Operation 4
35/112 TL160 Operating Manual 12.9.08 Version 1.0
4 Operation
4.1 Initial familiarization
• If you are not familiar with the operator controls
and display elements of this machine, read this
Chapter carefully before operating the machine.
This Chapter deals with all functions.
• Before driving and working with the machine it is
necessary to thoroughly familiarize yourself with
the display elements and operator controls.
• Each time before putting the machine into
operation it must be subjected to a thorough visual
inspection. Ensure that there is no damage, loose
or missing screws, oil accumulations, oil or fuel
leakage. Shortcomings must be remedied
immediately. In the event of shortcomings which
jeopardize the operating safety, the machine must
not be put into operation until these have been
eliminated.
• Before putting the machine into operation, the
inspections according to
Î
7.8, 76 must be carried
out.
Danger to life
due to unintentional operation of controls.
• The machine must be entered from the
left-hand side as seen in the direction of
travel.
The right-hand cabin door acts as an
emergency exit.
If the cabin is entered by the right-hand door,
the joystick may be operated unintentionally.