TM SERIES
1 - 8
4 7 2 7 9 7 - 1 / 1 5
T e r e x S o u t h D a k o t a , I n c .
T M S e r i e s
OPER
A
T
ION
GUIDEL
INES
UPPER CONTROLS
SINGLE STICK
ITEM
CONTROL
DESCRIPTION
1.
Single Stick
Controls upper boom, lower boom, rotation, and upper boom
extension.
2.
Engine Stop/Start (Optional) Allows the operator to stop and start the engine from the platform.
3.
Two-Speed Throttle
Auxiliary Let Down Power
(Optional)
Two-speed throttle provides two engine speeds, low and high, with
engine running. Low speed is engine idle.
Auxiliary let down power provides hydraulic power to lower and stow
the Aerial Device in the event of a prime power source failure.
4.
Hydraulic Tools (Optional)
Directs the oil to flow to the tool when connected to the quick couplers.
(Closed Center tools only)
5.
Stop
Diverts the oil to the tank to stop all operation of platform controls.
6.
Jib Articulation (Optional)
Allows the jib to be positioned at different angles.
7.
Winch (Optional)
Used for operating the winch during material handling operations.
8.
Platform Rotation (Optional) Allows the platform to rotate toward the end of the boom tip.
9.
Platform Leveling
Allows the platform to be hydraulically tilted to level the platform.
Utilized for emergency removal and platform clean out.
10.
Jib Extension (Optional)
Allows the jib to be hydraulically extended.
11.
Lower Boom Extend
Controls the Lower Boom extension.
12.
Fiber Optic Battery Box
Each box contains 4 AA size batteries which supply the electrical
current to create the signal for the Fiber Optic Switch.
13.
Level Battery Low Charge
Indicator
Illuminates if the leveling system battery is low. (Units equipped with
generator)
The decals are an integral part of this vehicle. If the decals are illegible, they must
be replaced.
Always operate controls slowly and deliberately for smooth movements. Rough
handling is never excusable and may cause damage to the Aerial Device and
endanger the operator.
13
9
7
3
2
5
11
4
8
10
6
12
1
